Users Guide

Security Commands 1094
• statistics—Display message tx/rx counts
• interface-id—An interface (Ethernet) identifier. See Interface Naming
Conventions for interface representation.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
Use this command with no parameters to display the global 802.1X
configuration. Use the statistics parameter to display statistics information
for a port.
The following configuration information is displayed for the detail parameter:
Field Description
Port The interface whose configuration is displayed.
Protocol Version The protocol version associated with this port. The only
possible value is 1, corresponding to the first version of the
802.1x specification.
PAE Capabilities The port access entity (PAE) functionality of this port. Possible
value is Authenticator.
Quiet Period The timer used by the authenticator state machine on this port
to define periods of time in which it will not attempt to acquire
a supplicant. The value is expressed in seconds and will be in
the range 0 and 65535. This is the period for which the
authenticator state machine stays in the HELD state.
Transmit Period The timer used by the authenticator state machine on the
specified port to determine when to send an EAPOL EAP
Request/Identity frame to the supplicant. The value is
expressed in seconds and will be in the range of 1 and 65535.