Administrator Guide

Security Commands 946
Syntax
radius-server timeout timeout
no radius-server timeout
• timeout — Specifies the timeout value in seconds. (Range: 1–30)
Default Configuration
The default value is 15 seconds.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example sets the interval for which a switch waits for a server to
reply to 5 seconds.
console(config)#radius-server timeout 5
retransmit
Use the retransmit command in RADIUS Server Configuration mode to
specify the number of times the RADIUS client retransmits requests to the
RADIUS server.
Syntax
retransmit retries
• retries — Specifies the retransmit value. (Range: 1-10 attempts)
Default Configuration
The default number for attempts is 3.
Command Mode
RADIUS mode
2CSNXXX_SWUM204.book Page 946 Monday, January 25, 2016 1:25 PM