Administrator Guide

Switch Management Commands 2263
Traceroute to 2001::2, 4 hops max, 43 byte packets:
1 2001::2 708 msec 41 msec 11 msec
2 2001::2 12 msec 13 msec 12 msec
3 2001::2 14 msec 9 msec 11 msec
update bootcode
Use the update bootcode command in Privileged EXEC mode to update the
bootcode on one or more switches. For each switch, the bootcode is extracted
from the active image and programmed to flash.
Syntax
update bootcode [ unit ]
• unit —Unit number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
It is not required to update the boot code unless directed to do so in the
release notes. Dell Networking switches utilize a universal boot loader and do
not contain version specific dependencies in the boot loader. If
unit is not
specified, all units in the stack are updated.
Example
The following example updates the bootcode on unit 2.
console#update bootcode 2
2CSNXXX_SWUM204.book Page 2263 Monday, January 25, 2016 1:25 PM