Administrator Guide

Table Of Contents
Layer 3 Routing Commands 1677
Example
The following example displays multicast configuration settings.
console#show ip mroute source 10.1.1.1 summary
console#show ip mroute source 10.1.1.1 239.5.5.5
show ip mroute static
Use the show ip mroute static command in Privileged Exec mode to display
all the static routes configured in the static mcast table if it is specified or
display the static route associated with the particular
sourceipaddr
.
Syntax
show ip mroute static [
sourceipaddr
]
sourceipaddr
— IP address of source.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the static routes configured in the static
mcast table.
console#show ip mroute static
MULTICAST STATIC ROUTES
Source IP Source Mask RPF Address Preference
--------------- --------------- --------------- ----------
1.1.1.1 255.255.255.0 2.2.2.2 23
2CSNXXX_SWUM204.book Page 1677 Monday, January 25, 2016 1:25 PM