Administrator Guide

Layer 3 Routing Commands 1676
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the multicast configuration settings such as
flags, timer settings, incoming and outgoing interfaces.
console#show ip mroute group 239.5.5.5 summary
console#show ip mroute group 239.5.5.5
show ip mroute source
Use the show ip mroute source command in Privileged Exec mode to display
the multicast configuration settings such as flags, timer settings, incoming
and outgoing interfaces, RPF neighboring routers, and expiration times of all
the entries in the multicast mroute table containing the
sourceipaddr or
sourceipaddr | groupipaddr pair value(s).
Syntax
show ip mroute source sourceipaddr {summary}
• sourceipaddr — IP address of source.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
Use the summary option to summarize the information displayed.
2CSNXXX_SWUM204.book Page 1676 Monday, January 25, 2016 1:25 PM