Administrator Guide

Layer-2 Multicast Features 915
mvr querytime time Set the MVR query response time. The value for time is in
units of tenths of a second. This is the time to wait for a
response to the query sent after receiving a leave message
and before removing the port from the group.
mvr mode {compatible |
dynamic}
Specify the MVR mode of operation.
mvr group
mcast-address
[ groups ]
Add an MVR membership group.
• mcast-address —The group IP multicast address
•
group —Specifies the number of contiguous groups
interface interface Enter interface configuration mode for the specified port.
The interface variable includes the interface type and
number, for example tengigabitethernet 1/0/3.
A range of ports can be specified using the interface range
command. For example, interface range
tengigabitethernet 1/0/8-12 configures interfaces 8, 9, 10,
11, and 12.
mvr Enable MVR on the port.
mvr immediate Enable MVR immediate leave mode on the port.
mvr type {source |
receiver}
Specify the MVR port type.
mvr vlan
vlan-id group
mcast-address
Allow the port to participate in the specified MVR group.
The
vlan-id parameter is the ID of the MVR multicast
VLAN.
CTRL + Z Exit to Privileged EXEC mode.
show ip dhcp snooping
[interfaces]
View the DHCP snooping global and per port
configuration.
show ip dhcp snooping
binding [{static |
dynamic}] [interface
port ] [vlan vlan-id ]
View the entries in the DHCP snooping bindings database.
show mvr View information about the administrative mode of MVR.
show mvr members View information about MVR groups and their members.
Command Purpose