Administrator Guide

Setting Basic Network Information 173
Figure 7-2. IP Interface Configuration (Default VLAN)
Assigning Network Information to the Default VLAN
To assign an IP Address and subnet mask to the default VLAN:
1
From the Interface menu, select VLAN 1.
2 From the Routing Mode field, select Enable .
3 From the IP Address Configuration Method field specify whether to
assign a static IP address (Manual) or use DHCP for automatic address
assignment.
4 If Manual is selected for the configuration method, then the IP Address
and
Subnet Mask can be entered in the appropriate fields.
5 Click Apply .
NOTE: No additional fields on the page must be configured. For information
about VLAN routing interfaces, see "Routing Interfaces " on page 1141.