Users Guide

Dell EMC Networking CLI 181
IP Routing
Command Description Mode
a
encapsulation Configures the link layer encapsulation type for
the packet.
IC
ip icmp echo-reply Configures an IP address on an interface. GC
ip icmp error-interval Limits the rate at which IPv4 ICMP error
messages are sent.
GC
ip load-sharing Configures the hash algorithm for ECMP
routes.
GC
ip directed-broadcast E
nables the forwarding of network-directed
broadcasts.
IC
ip policy route-map Applies a route map on an interface. IC
ip redirects Enables the generation of ICMP Redirect
messages.
IC
ip route Configures a static route. Use the no form of
the command to delete the static route.
GC
ip route default Configures the default route. Use the no form
of the command to delete the default route.
GC
ip route distance Sets the default distance (preference) for static
routes.
GC
ip routing Globally enables IPv4 routing on the router. GC
ip unnumbered Identifies an interface as an unnumbered
interface and specifies the numbered interface
providing the borrowed address.
IC
ip unnumbered gratuitous-
arp accept
Enables installation of a static interface route to
the unnumbered peer upon receiving a
gratuitous ARP.
IC
ip unreachables Enables the generation of ICMP Destination
Unreachable messages.
IC
match ip address Specify IP address match criteria for a route
map.
RM
match length Configures packet length matching criteria for a
route map.
RM