Users Guide

Layer 3 Routing Commands 1531
User Guidelines
This command has no user guidelines.
Example
The following example applies SNAP encapsulation for VLAN 15.
console(config)#interface vlan 15
console(config-if-vlan15)#encapsulation snap
ip icmp echo-reply
Use the ip icmp echo-reply command to enable or disable the generation of
ICMP Echo Reply messages. Use the no form of this command to prevent the
generation of ICMP Echo Replies.
Syntax
ip icmp echo-reply
no ip icmp echo-reply
Default Configuration
ICMP Echo Reply messages are enabled by default.
Command Mode
Global Configuration mode
User Guidelines
The command operates on the global router instance and the same
configuration applies to any virtual routers created on the system.
Example
console(config)#ip icmp echo-reply
Command History
Command mode changed in version 6.7.0 firmware.