Users Guide

Security Commands 1142
Example
The following example sets the unauthenticated VLAN on Gi1/0/21/0/2 to
VLAN 20.
console(config-if-Gi1/0/2)# authentication event fail action authorize vlan 20
show dot1x advanced
Use the show dot1x advanced command to display 802.1x advanced features
for the switch or for the specified interface.
Syntax
show dot1x advanced [{gigabitethernet unit/slot/port| tengigabitethernet
unit/slot/port | fortygigabitethernet unit/slot/port}]
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
The output of this command has been updated in release 2.1 to remove the
Multiple Hosts column and add an Unauthenticated VLAN column, which
indicates whether an unauthenticated VLAN is configured on a port. The
command has also been updated to show the Guest VLAN ID (instead of the
status) since it is now configurable per port.
Example
The following example displays 802.1x advanced features for the switch.
console#show dot1x advanced
Port Guest Unauthenticated
VLAN Vlan
--------- --------- ---------------
Gi1/0/1 Disabled Disabled
Gi1/0/2 10 20
Gi1/0/3 Disabled Disabled