Users Guide

Layer 3 Routing Commands 1871
Syntax
vrrp group authentication {none | simple key}
no vrrp group authentication
• group—The virtual router identifier. (Range: 1-255)
• none—Indicates authentication type is none.
• simple—Authentication type is a simple text password.
• key—The key for simple authentication. (Range: String values)
Default Configuration
None is the default configuration.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
This command has no user guidelines.
Example
The following example sets the authorization details value for VRRP router
group 5 on VLAN 15.
console(config)#interface vlan 15
console(config-if-vlan15)#vrrp 2 authentication simple test123
vrrp description
Use the vrrp description command in Interface Configuration mode to assign
a description to the Virtual Router Redundancy Protocol (VRRP) group. To
remove the description, use the no form of the command.
Syntax
vrrp group description text
no vrrp group description
• group—The virtual router identifier. (Range: 1-255)
• text—Description for the virtual router group up to 80 characters.