Users Guide

Security Commands 949
by default. If it fails to communicate with the primary server for any reason, it
uses the backup servers configured with the same server name. These backup
servers are identified as the “Secondary” type.
Syntax
primary
Default Configuration
There is no primary authentication server by default.
Command Mode
RADIUS Server Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(Config-auth-radius)#primary
priority
Use the priority command in RADIUS Server Configuration mode to specify
the order in which the servers are to be used, with 0 being the highest priority.
Syntax
priority priority
• priority — Sets server priority level. (Range 0-65535)
Default Configuration
The default priority is 0.
Command Mode
RADIUS Server Configuration mode