Users Guide

Switch Management Commands 2197
Default Configuration
The default logging monitor severity level is warnings. By default, logging
messages are not displayed on SSH or telnet sessions (no logging monitor
warnings). Logging messages are displayed by default on console sessions
(serial and out-of-band ports).
Command Mode
Global Configuration mode
User Guidelines
Messages logged to the console are filtered based on severity. Selecting a
severity level will log that severity and higher (numerically lower) level
messages.
logging on
Use the logging on command in Global Configuration mode to control error
messages logging. This command globally enables the sending of logging
messages to the currently configured locations. To disable the sending of log
messages, use the no form of this command.
Syntax
logging on
no logging on
Default Configuration
Logging is enabled.
Command Mode
Global Configuration mode
User Guidelines
The logging process controls the distribution of logging messages to the
various destinations, such as the logging buffer, logging file, or SYSLOG
server. Logging on and off for these destinations can be individually