Users Guide

Data Center Technology Commands 1185
console# show lldp tlv-select interface all
Interface ETS Config ETS Recommend PFC App Priority QCN
----------- ---------- ------------- --- ------------ ---
te1/0/1 Yes No Yes No Yes
te1/0/2 No No Yes No Yes
show lldp dcbx
Use the show lldp dcbx command to display the Traffic Class to Traffic Class
Group mapping.
Syntax
show lldp dcbx [interface [all|interface-id detail|status]]
• interface-id —A valid Ethernet interface specifier.
• all—All interfaces.
• detail—Display detailed DCBX information.
• status—Display a status summary.
Default Configuration
This command has no default setting.
Command Mode
Privileged Exec
User Guidelines
NOTE: This command is only available on N40xx series switches.
This command has no user guidelines.
Example #1
DCBX Status:
console# show lldp dcbx interface all status
Config DCBX DCBX Frame TLV
Interface Status Role Version Rx Tx Errors Dscrd Dscrd
---------- ------- -------- -------- ------ ------ ------ ------ -----
te1/0/1 Enabled Auto-up CEE 1.06 Yes 32 37 0 0
te1/0/2 Enabled Auto-up IEEE 32 37 0 0