Users Guide

Table 8. Power Center events and severity levels (continued)
Type Description Severity Level
PDU Low Load The PDU power is lower than the low
load threshold.
Warning
PDU Outlet High Load The PDU outlet power is greater than
the high load threshold.
Warning
PDU Outlet Low Load The PDU outlet power is lower than the
low load threshold.
Warning
PDU Outlet Off The PDU outlet is Off. Informative
PDU Outlet On The PDU outlet is On. Informative
PDU Outlet Overload The PDU outlet is overloaded. Critical
PDU Overload The PDU is overloaded. Critical
Protocol Operation Failed Device protocol operation failed. Warning
Server Capabilities Changed The server capabilities have changed, for
example, a license change. This event is
only applicable to a device that has a
policy applied. When you see such an
event, check the policy on the device.
Warning
Unsupported Sampling Interval Cannot set sampling interval to device.
iDRAC 6 devices with a BMC firmware
version older than version 1.5 only
support a 1-minute sampling interval. Use
a 1-minute sampling interval for such
device, or upgrade the BMC firmware to
newer version.
Warning
UPS Battery Failed Events related to battery failure in the
UPS.
Critical
UPS Battery Low Events related to low battery limits and
exceeded thresholds in the UPS.
Critical
UPS Bypass Failure Events related to bypass failure in the
UPS.
Critical
UPS Charge Failure Events related to charge failure in the
UPS.
Critical
UPS Communication Lost Events related to communication lost in
the UPS.
Warning
UPS Fan Failure Events related to power fan failure in the
UPS.
Critical
UPS Input Power Events related to power input failure in
the UPS.
Critical
UPS On Bypass Events related to on bypass in the UPS. Informative
UPS Output Power Events related to power output failure in
the UPS
Critical
Event Management 91