Users Guide

● Hypervisor
○ HTTPs Protocol
○ WMI Protocol
NOTE: By default, OpenManage Power Center uses port 8643 for power center application and port 8644 for redfish
HTTPS events. You also have the option to use a different port apart from the default port.
5. Click Finish.
Editing a protocol
You can edit the protocol information of a device.
1. In the left pane, expand Tasks and click Protocols.
The Protocols screen is displayed.
2. Select the check box next to the protocol profile name you want to edit.
3. In the task menu, click Edit.
The Edit Protocol window is displayed.
4. Make the required changes.
5. Click Finish to save your changes, or click Cancel to discard them.
Deleting a protocol
1. In the left pane, expand Tasks, and click Protocols.
The Protocols screen is displayed.
2. Select the check box next to the connection protocol that you want to delete.
3. In the task menu, click Delete.
The following message is displayed: Are you sure you want to delete the selected protocol(s)?
4. Click Yes.
The selected protocols are deleted.
Task management
53