API Guide

Table 84. Parameters for idrac.cong_mgr.congure_web_server
Parameter Name Type Allowed Values
enable_web_server
Enum
Enable_WebServerTypes.Enabled
Enable_WebServerTypes.Disabled
Description Select Enabled to enable the iDRAC web server. This setting is enabled by default.
NOTE: Disabling the web server disables the current web interface session and you
cannot log in to iDRAC web interface or use remote RACADM.
Table 85. Parameters for idrac.cong_mgr.congure_web_server
Parameter Name Type Allowed Values
http_port
Number HTTP Port number
Description Enter the port number that iDRAC uses to listen for a browser connection. The default value is
80. The value must be 1–65535.
Table 86. Parameters for idrac.cong_mgr.congure_web_server
Parameter Name Type Allowed Values
https_port
Number HTTPS Port number
Description Enter the port number that iDRAC uses to listen for a secure browser connection. The default
value is 443. The value must be 1–65535.
Table 87. Parameters for idrac.cong_mgr.congure_web_server
Parameter Name Type Allowed Values
timeout
Number Timeout seconds
Description
Enter the time (in seconds) for which a connection is allowed to remain Idle.
The session is canceled when the time-out is reached.
Changes to the timeout setting do not aect the current session.
When you change this time, you must logout and log in again for the new setting to take eect.
Timeout range is 60–10,800 seconds.
The default value is 1800 seconds.
Table 88. Parameters for idrac.cong_mgr.congure_web_server
Parameter Name Type Allowed Values
ssl_encryption
Enum
SSLEncryptionBitLength_WebServerTypes.T.A
uto_Negotiate
SSLEncryptionBitLength_WebServerTypes.T.
128–bit or higher
SSLEncryptionBitLength_WebServerTypes.T.
168–bit or higher
36 OpenManage Python SDK API introduction