API Guide

Table 26. Parameter for connection time-out
Parameter Name Type Allowed Values
connection_timeout
Integer NA
Description Time in seconds to wait for the server to connect before giving up.
Table 27. Parameter for read time-out
Parameter Name Type Allowed Values
read_timeout
Integer NA
Description Time in seconds to wait for the server to read data before giving up.
Table 28. Parameter for max retries
Parameter Name Type Allowed Values
max_retries
Integer NA
Description HTTP connection retries in case of failures.
Table 29. Parameter for verify ssl
Parameter Name Type Allowed Values
verify_ssl
Boolean NA
Description SSL certicate verication.
MonitorScopelter.setdefaultMap
API string/Method: MonitorScopefilter.setdefaultMap .
Description: MonitorScopeFilter.setdefaultMap(MonitorScope.MainHealth, "Unknown") is used to change the default value of the monitor
scope attributes that gives out null values or if they are not available in the particular device.
NOTE
: To execute this API, load the driver using nd_driver or get_driver API . Also get_entityjyson API is mandatory for this
execution.
Table 30. Parameters for MonitorScopelter.setdefaultMap
Parameter Name Type Allowed Values
mScope
Enum MonitorScope
MonitorScope.BasicInventory
MonitorScope.CongState
MonitorScope.Health
MonitorScope.Inventory
MonitorScope.MainHealth
MonitorScope.Metrics
16 OpenManage Python SDK API introduction