Users Guide

Options Description
If --enable parameter is passed, the logs are created else the logs are not
created.
--force
--force rewrites the cong le.
--warranty.criticalDays
Warranty critical days. Allowed value is [1-365]. Default value is 10.
NOTE: The value of Warranty critical days should be less than
Warranty warning days.
--warranty.warningDays
Warranty warning days. Allowed value is [1-365]. Default value is 30.
--nagios.type
Decides the output format of the host le. Allowed options is 0 for .cfg format
and 1 for .xml format.
Default values is 0.
Table 12. Dell EMC Device Helper Utility Mandatory Parameters
--host
These parameters dene the value of the Dell EMC device to be
discovered.
--filename
--subnet
--snmp.version
This parameter is mandatory for a Dell EMC device discovered
through SNMP.
--http.user
This parameter is mandatory for a Dell EMC device discovered
through WSMan / Redsh.
--http.password
--output.file
This displays the location where the host le will be created
in .cfg format
Based on the options you selected during discovery, the following services are associated with that host:
• If you run the Python command python dellemc_nagios_discovery_service_utility.py without the --all option,
then only the basic services are created by default and displayed in the user interface under Services.
NOTE: SNMPTT must be congured for you to be able to receive
traps.
• If you run python dellemc_nagios_discovery_service_utility.py with the --all option, detailed services are created
as listed in the table below, and are displayed in the Nagios Core console under Services:
Table 13. Default services created for Dell EMC Servers based on the selected protocol
Services SNMP WSMan Protocol Redsh Protocol
Basic Services
Dell EMC Server Overall Health
Status
√ √ √
Dell EMC Server Information √ √ √
Dell EMC Server Traps √ √ √
Detailed Services
16
デバイスの検出とインベントリ