Users Guide

Device discovery and inventory

Topics:

• About device discovery

• About Dell EMC device discovery utility

• Discovering Dell EMC devices

• Device information

About device discovery

You can discover the supported Dell EMC devices with this plug-in in the Nagios Core console. The monitoring protocols for the supported

Dell EMC devices are as follows:

• Dell EMC Servers are discovered using SNMP or WSMan protocol or Redfish REST APIs.

• Dell EMC Chassis are discovered using WSMan protocol.

• Dell EMC Storage and Dell EMC Network Switches are discovered using SNMP protocol.

NOTE: For discovery using Redfish REST APIs, iDRAC firmware version should be 2.50.50.50 or above.

NOTE: For Dell EMC server discovered through Redfish, if the iDRAC firmware version is 2.50.50.50, the attribute

values of OSName, OSVersion, ChassisServiceTag, GroupManager and GroupStatus will be shown as Not available

You must use Dell EMC Discovery Utility to discover Dell EMC devices. If the discovery is successful, then for the discovered devices,

host and service definition files are created. For a device, it is recommended to have a unique host name and IP address. In Nagios Core,

ensure that a host and service definition is not already present for a Dell EMC device that you want to discover.

You can discover devices using any of the following:

• Device IP address or FQDN

• Subnet with Mask

• File Containing a list of device IP addresses or FQDNs or Subnet with Mask

•

NOTE:

At a time you can discover a Dell EMC Server using SNMP or WSMan protocol or Redfish REST APIs. To

rediscover a server previously discovered through SNMP protocol with WSMan protocol or Redfish REST APIs or

vice versa, run the Dell EMC Discovery Utility option along with the value of the desired protocol.

NOTE: If a server was discovered using SNMP, but you want to discover the same device using WSMan protocol,

navigate to <NAGIOS_HOME>/dell/scripts, and run the following Python commands:

For example:

To discover a SNMP device through WSMan Protocol using Host name details:

python dellemc_nagios_discovery_service_utility.py --host=<host name / IP address> --

prefProtocol=2 --http.user=root --http.password=calvin --output.file=/usr/local/nagios/

dell/config/objects/

<NAGIOS_HOME> is the installed location of Nagios Core and by default, the location of <NAGIOS_HOME> is /usr/local/

nagios.

About Dell EMC device discovery utility

To run the Dell Device Discovery Utility, navigate to <NAGIOS_HOME>/dell/scripts, and run the following Python command:

python dellemc_nagios_discovery_service_utility.py -h

All the available Dell EMC device discovery utility options are displayed.

12 Device discovery and inventory