Users Guide

Service Status Description
• Critical
• Unknown
Dell EMC Storage SC-Series
Management Traps
The following states are possible:
• OK
• Warning
• Critical
• Unknown
Provides trap information of the Compellent
SC-Series storage Arrays
Dell EMC Storage SC-Series Controller
Traps
The following states are possible:
• OK
• Warning
• Critical
• Unknown
Provides trap Information of the Compellent
SC-Series storage Arrays.
Dell EMC Storage MD-Series Traps The following states are possible:
• OK
• Warning
• Critical
• Unknown
Provides trap Information of the PowerVault
MD-Series storage arrays.
Dell EMC Storage ME4 Traps The following states are possible:
• OK
• Warning
• Critical
• Unknown
Provides trap Information of the PowerVault
ME4 storage arrays.
Dell EMC Network Switch Traps The following states are possible:
• OK
• Warning
• Critical
• Unknown
Provides trap Information of the Dell EMC
Network Switch.
Viewing SNMP alerts
Prerequisites:
• SNMPTT is installed and configured and the Dell EMC integration on SNMPTT is configured.
• SNMP Trap destination is configured in the supported Dell EMC devices.
To view SNMP alerts:
1. In the Nagios XI user interface, click the Home tab, then select Service Detail in the left pane.
The Service Status page is displayed.
2. Navigate to the respective Dell EMC device specific trap service.
Only the last received SNMP alert is displayed in the status information and the severity of the alert is updated in the status.
40
Monitoring Dell EMC devices