Users Guide
Dell EMC Configuration Wizard
You can discover Dell EMC devices using the Dell EMC Configuration Wizard. This wizard takes you through a series of configuration
steps where you provide appropriate input required to discover the hosts and associate them with their respective services. The Dell EMC
plug-in validates the inputs at the end of each step before proceeding to the next step and displays appropriate message prompts or
summary.
Dell EMC recommends that you discover a maximum of 255 devices at a time for a better user experience.
The devices are discovered either through SNMP or WSMan protocol or Redfish REST APIs. The monitoring protocols for the supported
devices are as follows:
• Dell EMC Servers can be discovered using SNMP or WSMan protocol or Redfish. Redfish is the default protocol.
• Dell EMC Chassis can be discovered using WSMan protocol.
Ensure that you only monitor Dell EMC Chassis using local user credentials.
• Dell EMC Storage and Dell EMC Network Switches can be discovered using SNMP protocol.
• MX7000 chassis and ME4 are discovered using REST protocol.
You can discover devices using any of the following:
• Auto-Discovery Jobs – Select an auto discovery job.
• Subnet – Subnet with mask.
• File – File Containing a list of device IP addresses or FQDNs.
Topics:
• Dell EMC Configuration Wizard discovery parameters
• Dell EMC devices and associated services
Dell EMC Configuration Wizard discovery
parameters
You must configure the discovery parameters by providing inputs for device discovery. The parameters or inputs available in the
Configuration Wizard are detailed in this section.
Discovery target
You can discover the devices by using options listed under Discovery target. The following table lists the options and their description:
Table 14. Discovery options
Option Description
Auto-Discovery Jobs Enables you to select a previously added auto discovery job.
To add Auto-Discovery Jobs to the Nagios XI console, see Creating
Auto-Discovery Jobs.
Subnet Subnet with mask. You can enter a valid subnet address with mask.
File A text file containing a list of newline separated unique IP
addresses.
To select a file, click the Browse button, navigate to the location
where you have saved the file and select it.
5
14 Dell EMC Configuration Wizard