Dell EMC OpenManage Plug-in Version 3.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2020 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents 1 Release Type and Definition...........................................................................................................4 Version.................................................................................................................................................................................... 4 Release Date...................................................................................................................................................................
1 Release Type and Definition Dell EMC OpenManage Plug-in version 3.1 for Nagios provides capabilities for Out-of-Band (Agent-Free) management of iDRAC based PowerEdge Servers, Modular Infrastructure, Hyper-Converged Infrastructure (HCI),Datacenter Scalable Solutions(DSS), Storage and Networking devices. This plug-in provides complete hardware-level visibility including detailed inventory, health status (both overall and component-level health status) and SNMP trap monitoring for supported devices.
2 What is new Dell EMC OpenManage Plug-in Version 3.1 for Nagios supports the following new features: • • • • • • • • • • • • Support for latest PowerEdge Server Platforms with iDRAC9 Support for PowerEdge MX7000 Modular Chassis.
3 Fixes Switch discovery fails if the switch is configured as Stack.
4 Important Notes To visit Dell TechCenter for accessing whitepapers, blogs, wiki-articles, videos, Product communities and forums, see: https:// www.dell.
5 Known Issues Issue 1(25122): Description: In "Dell EMC Chassis I/O Module Status" service, value for "FabricType" is shown incorrectly as "UNKNOWN, for few IO Modules when PowerEdge M1000e chassis is discovered. Version Affected: Version 3.1 Issue 2(25121): Description: In "Dell EMC Chassis power supply status" service, health status for one of the power supply instance which is standby is shown as "UNKNOWN" when Dell EMC Chassis is discovered. Version Affected: Version 3.
Launch the respective chassis console for the PowerEdge M1000e, PowerEdge VRTX, and PowerEdge FX2/FX2s chassis host from the Nagios Core to view the the health status of standby power supply. Issue 6(93599): Description: In "Dell EMC Server Controller Status" service, an extra instance will be shown only when Dell EMC PowerEdge server is been discovered using RedFish protocol and that device have SATA controller Version Affected: Version 3.
6 Limitations The following are the limitations: • 10 IPv6 traps are not associated with the corresponding Dell EMC device in the Nagios console Limitations
7 Installation Prerequisites For the installation prerequisites, see the "Dell EMC OpenManage Plug-in Version 3.1 for Nagios Installation Guide" at dell.
8 Installation Instructions For installation or update related information, see the "Dell EMC OpenManage Plug-in Version 3.1 for Nagios Installation Guide" at dell.
9 Installation and Configuration Notes For installation and configuration related information, see the "Dell EMC OpenManage Plug-in Version 3.1 for Nagios Installation Guide" at dell.
10 Accessing documents from the Dell EMC support site You can access the required documents in one of the following ways: • Using the following links: • • • • • • For Dell EMC Enterprise Systems Management, Dell EMC Remote Enterprise Systems Management, and Dell EMC Virtualization Solutions documents — www.dell.com/esmmanuals For Dell EMC OpenManage documents — www.dell.com/openmanagemanuals For iDRAC documents — www.dell.
11 Contacting Dell NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues: 1. Go to Dell.com/support. 2. Select your support category. 3.
