Users Guide
Table Of Contents
- Dell EMC OpenManage Plug-in Version 3.0 For Nagios XI User’s Guide
- Introduction
- What is new in Dell EMC OpenManage Plug-in version 3.0
- Key features
- Support matrix
- Dell EMC Configuration Wizard
- Device discovery using the Dell configuration wizard
- Viewing Dell EMC devices
- Monitoring Dell EMC devices
- Launching Dell EMC device consoles
- Warranty information for Dell EMC devices
- Knowledge Base information for the generated alerts
- Removing Dell EMC devices or services
- Troubleshooting
- Frequently asked questions
- Appendix
- Related documentation and resources
Table 30. Dell EMC trap information
Service Status Description
● Critical
Dell EMC Storage SC-Series
Controller Traps
The following states are possible:
● OK
● Warning
● Unknown
● Critical
Provides trap information of the
Compellent SC-Series storage Arrays.
Dell EMC Storage MD-Series Traps The following states are possible:
● OK
● Warning
● Unknown
● Critical
Provides trap information of the
PowerVault MD-Series storage Arrays.
Dell EMC Network Switch Traps The following states are possible:
● OK
● Warning
● Unknown
● Critical
Provides trap Information of the Dell
EMC Network Switch.
Viewing SNMP alerts
Prerequisites:
● SNMPTT is installed and configured and the Dell EMC integration on SNMPTT is configured.
● SNMP Trap destination is configured in the supported Dell EMC devices.
To view SNMP alerts:
1. In the Nagios XI user interface, click the Home tab, then select Service Detail in the left pane.
The Service Status page is displayed.
2. Navigate to the respective Dell EMC device specific trap service.
Only the last received SNMP alert is displayed in the status information and the severity of the alert is updated in the status.
34
Monitoring Dell EMC devices