Users Guide

Service Status Description

• Warning

• Critical

• Unknown

Dell EMC Network Switch Traps The following states are possible:

• OK

• Warning

• Critical

• Unknown

Provides trap Information of the Dell EMC

Network Switch.

Viewing SNMP alerts

Prerequisites:

• Nagios Core with SNMPTT is installed and configured and the Dell integration on SNMPTT is configured.

• SNMP Trap destination is configured with Nagios Core server in the supported Dell EMC devices.

NOTE: To receive SNMP traps from PowerVault MD 34/38 series storage arrays, SNMP trap destination must be

configured for that device in the Modular Disk Storage Manager (MDSM) console.

For information on configuring SNMP Trap destination in the iDRAC interface, see Appendix.

To view SNMP alerts:

In Nagios Core user interface, under Current Status, select Services and then navigate to the respective Dell EMC device specific trap

service.

Displays the last received SNMP alert in the status information and the severity of the alert is updated in the status. To view all the SNMP

alerts that were received, select Reports > Alerts > History.

Monitoring Dell EMC devices