Users Guide

Table 16. Default services created for EqualLogic PS-Series Storage Arrays based on SNMP protocol
Services
Basic Services
Detailed Services
Dell EMC Storage PS-Series Member Physical Disk Status
Dell EMC Storage PS-Series Group Volume Status
Dell EMC Storage PS-Series Group Storage Pool Status
Dell EMC Storage PS-Series Group Storage Pool Information
Dell EMC Storage PS-Series Member Warranty Information
Table 17. Default services created for PowerVault MD-Series Storage Arrays based on SNMP protocol
Services
Basic Services
Dell EMC Storage MD-Series MD Overall Health Status
Dell EMC Storage MD-Series MD Information
Dell EMC Storage MD-Series MD Traps
Detailed Services
Dell EMC Storage MD-Series Warranty Information
About protocol parameters
During discovery, depending on the protocol you have selected, SNMP or WSMan, you can set values for the protocol in the
parameters file, .dell_device_comm_params.cfg.
The .dell_device_comm_params.cfg file is present at the following location:<NAGIOS_HOME>/dell/scripts. The
options provided are:
Table 18. Parameters file
Protocol communication parameters Description
SNMP
snmp.version
Use to input the SNMP version. Default version is 2.
snmp.community
Use to input the user macro for SNMP community string.
snmp.retries
Use to input the number of times an SNMP request must be
sent when a timeout occurs . Default retry value is 1.
snmp.timeout
Use to input SNMP timeout value in seconds. Default timeout
value is 3 seconds.
snmp.port
Use to input the SNMP port value. Default SNMP port value is
161.
WSMan
wsman.username
Use to input the user macro for WSMan service account user
name.
wsman.password
Use to input the user macro for WSMan service account
password.
wsman.port
Use to input the WSMan port value. Default value is 443.
16 Device discovery and inventory