Users Guide
Table Of Contents
- Dell OpenManage Plug-in Version 2.0 for Nagios Core User’s Guide
- Contents
- Introduction to Dell EMC OpenManage Plug-in Version 3.1 for Nagios Core
- What is new
- Key features
- Support matrix
- Device discovery and inventory
- Monitoring Dell EMC devices
- Launching Dell EMC device specific consoles
- Warranty information for Dell EMC devices
- Removing Dell EMC devices
- Knowledge Base messages for the generated alerts
- Troubleshooting
- Frequently asked questions
- Appendix
Unable to view the KB information from the device trap
after the Nagios Management Server IP address is changed
The new IP address has to be updated in the following configuration files:
● Dell_Agent_free_Server_Traps.conf
● Dell_Chassis_Traps.conf
● Dell_EqualLogic_Traps.conf
NOTE: By default, the configuration files are available at the location: <Nagios_Home>/dell/config/templates
To update the new IP address in the above mentioned configuration files, run the following command and then restart snmptt
service:
sed -i s/<Old IP>/<New IP>/g <Nagios_Home>/dell/config/templates/Dell*_Traps.conf
50 Troubleshooting