Users Guide

SNMP traps are not received from the Dell EMC devices in
the Nagios Core Console for Ubuntu setup.
Resolution :Replace #!/bin/sh to #!/bin/bash in <NAGIOS_HOME>/libexec/eventhandlers/submit_check_result and
then, restart SNMPTT and Nagios service.
Nagios console doesn't get
eqlMemberGatewayIPAddrChanged trap
Resolution :After changing the EqualLogic Member Gateway IP address, you need to make sure that the connectivity from
EqualLogic member or EqualLogic Group to trap listener is available.
The Dell EMC OpenManage Plug-in for Nagios Core
installation script is failing
1. You have adequate permissions to run the script.
Recommended: Nagios Administrator.
2. The prerequisites as mentioned in the Installation Guide are met.
3. You have provided correct inputs to the installation script.
The Dell EMC OpenManage Plug-in for Nagios Core
uninstallation script is failing
1. You have adequate permissions to run the script.
Recommended: Nagios Administrator.
2. The uninstallation script is running from the location where the Dell EMC OpenManage Plug-in is installed.
The discovery script is failing to execute
1. The discovery script has appropriate permissions.
Recommended: Nagios Administrator.
2. The appropriate arguments are provided while running the script.
The discovery script is not creating the host and service
definition file for IPv4 or IPv6 addresses or hosts
1. OMSDK is installed.
2. The IP addresses or hosts are reachable.
3. SNMP or WSMan or Redfish is enabled on the given IP addresses or hosts.
4. The appropriate protocol parameters are passed during discovery.
Troubleshooting
47