Users Guide

Table 22. Default services created for PowerVault ME4-Series Storage Arrays based on REST protocol
Services
Basic Services
Dell EMC Storage ME4-Series ME4 Overall Health Status
Dell EMC Storage ME4-Series ME4 Information
Dell EMC Storage ME4-Series ME4 Traps
Detailed Services
Dell EMC Storage ME4-Series Warranty Information
Dell EMC Storage ME4-Series Controller Status
Dell EMC Storage ME4-Series Fans Status
Dell EMC Storage ME4-Series I/O Module Status
Dell EMC Storage ME4-Series NIC Status
Dell EMC Storage ME4-Series Physical Disk Status
Dell EMC Storage ME4 series Disk Group
Dell EMC Storage ME4-Series Power Supply Status
Dell EMC Storage ME4-Series Storage Pool Status
Dell EMC Storage ME4-Series Storage Enclosure Status
Dell EMC Storage ME4-Series Volume Status
About protocol parameters
During discovery, depending on the protocol you have selected, SNMP or WSMan or Redfish, you can set values for the
protocol in the parameters file, .dell_device_comm_params.cfg.
The .dell_device_comm_params.cfg file is present at the following location:<NAGIOS_HOME>/dell/scripts. The
options provided are:
Table 23. Parameters file
Protocol communication parameters Description
SNMP
snmp.version
Use to input the SNMP version. Default version is 2.
snmp.community
Use to input the user macro for SNMP community string.
snmp.retries
Use to input the number of times an SNMP request must be
sent when a timeout occurs . Default retry value is 1.
snmp.timeout
Use to input SNMP timeout value in seconds. Default timeout
value is 3 seconds.
snmp.port
Use to input the SNMP port value. Default SNMP port value is
161.
WSMan / Redfish
http.username
Use to input the user macro for WSMan/Redfish service
account user name.
http.password
Use to input the user macro for WSMan/Redfish service
account password.
Device discovery and inventory 21