Users Guide

Table 3. Default services created based on selected protocol (continued)
Services SNMP WS-MAN Protocol
Dell Server Battery Status √ √
Dell Server Intrusion Status √ √
Dell Server Network Device
Status
√ √
Dell Server CPU Status √ X
Dell Server Power Supply
Status
√ X
Dell Server Temperature
Probe Status
√ X
Dell Server Voltage Probe
Status
√ X
Dell Server Controller Status √ X
Dell Server Amperage Status √ X
Dell Server SD Card Status X √
About Protocol Parameters
During discovery, depending on the protocol you have selected, SNMP or WS-MAN, you can set values for the protocol in the
parameters file, .dell_device_comm_params.cfg.
The .dell_device_comm_params.cfg file is present at the following location:<NAGIOS_HOME>/dell/scripts. The
options provided are:
Table 4. Parameters File
Protocol Communication Parameters Description
SNMP
snmp.version
Use to input the SNMP version. Default version is 2.
snmp.community
Use to input the user macro for SNMP community string.
snmp.retries
Use to input the number of times an SNMP request must be
sent when a timeout occurs . Default retry value is 1.
snmp.timeout
Use to input SNMP timeout value in seconds. Default timeout
value is 3 seconds.
snmp.port
Use to input the SNMP port value. Default SNMP port value is
161.
WS-MAN
wsman.username
Use to input the user macro for WS-MAN service account
user name.
wsman.password
Use to input the user macro for WS-MAN service account
password.
wsman.port
Use to input the WS-MAN port value. Default value is 443.
wsman.timeout
Use to input WS-MAN timeout value in seconds. Default
timeout value is 60 seconds.
wsman.retries
Use to input the number of times a WS-MAN request must be
sent when a timeout occurs. Default retry value is 2.
8 Device Discovery and Inventory