Install Guide

Table 2. Supported firmware versions for Dell devices
Dell Device Firmware Supported Firmware Versions
Dell 12th generation of PowerEdge servers iDRAC7 2.20.20.20 and 2.15.10.10
Dell 13th generation of PowerEdge servers iDRAC8 2.20.20.20 and 2.15.10.10
Dell PowerEdge R530xd iDRAC8 2.20.20.20 and 2.12.12.12
Dell PowerEdge R930 iDRAC8 2.20.20.20 and 2.13.13.12
Dell PowerEdge C4130 iDRAC8 2.20.20.20 and 2.15.10.10
Dell PowerEdge C6320 iDRAC8 2.14.14.12
Dell Datacenter Scalable Solutions (DSS 1500 and
DSS 2500)
iDRAC8 2.16.16.12
Dell Datacenter Scalable Solutions (DSS 1510) iDRAC8 2.17.17.13
Dell PowerEdge M1000e Chassis CMC 5.1 and 5.0
Dell PowerEdge VRTX Chassis CMC 2.1 and 2.0
Dell PowerEdge FX2/FX2s Chassis CMC 1.3 and 1.2
Dell Compellent Storage Arrays NA 6.6 and 6.5
Dell EqualLogic PS-Series Storage Arrays NA 8.0.4 and 7.1.7
Dell PowerVault MD 34/38 Series Storage Arrays NA 8.20.09.60 and 8.20.05.60
● If you are using SNMP, ensure that SNMP is configured in the respective devices.
If you want to receive SNMP traps in the Nagios Core console, ensure that you configure the SNMP trap destination in the
respective devices.
For more information, see Appendix in the Dell OpenManage Plug-in Version 2.0 for Nagios Core User’s Guide at dell.com/
omconnectionsEnterpriseSystemsManagement.
● If you are using WS-MAN protocol, it is recommended that you use a WS-MAN service account other than the default
service account. For more information, see Configuring User Accounts and Privileges in the respective device’s User’s
Guide at Dell.com/esmmanuals.
For the list of supported platforms, see Support Matrix in the Dell OpenManage Plug-in Version 2.0 for Nagios Core User’s
Guide.
System requirements
7