Setup Guide

Table 2. OME connection parameters for Operations Connector (continued)
Parameters Syntax Description
OME Password configureBsmconnectorForOME.bat -
setomepassword
This command is used to configure the
password for the OME user that you
configured while configuring OME User
Name.
OME Domain Name configureBsmconnectorForOME.bat -
setomedomain
This command is used to configure the
Active Directory Domain name which is
used with the OME user credentials for
communicating with the OME.
OME Port Number configureBsmconnectorForOME.bat -
setomeport
This command is used to configure the
port number for connecting with OME.
If you do not provide a port number, then
the default OME port number 2607 is
used.
If you have provided a different port
number while installing OME, then ensure
that you provide the same port number to
configure OME port number.
NOTE: For OME user-specific information, see the OpenManage Essentials User's Guide at Dell.com/
omconnectionsEnterpriseSystemsManagement or Dell.com/openmanagemanuals.
Configuring the task scheduler parameters
The following are the Task Schedulers that you must configure after installing the Operations Connector for OME:
● Dell EMC Event Scheduler—Collects the topology information from OME.
● Dell EMC Topology Scheduler—Collects the event information from OME.
To configure the task scheduler parameters, perform the following steps:
1. On the HPE Operations connector server, open Task Scheduler.
2. In the left pane, select Task Scheduler Library.
3. In the right pane, you can view the following tasks:
● Dell EMC Event Scheduler
● Dell EMC Topology Scheduler
4. Double-click on each of the tasks.
The Properties window is displayed for each of the tasks. In the Properties window, perform the following settings:
a. In the General tab, under the Security options, select the Run whether user is logged on or not option.
b. Click OK.
c. Enter the user login credentials when prompted.
NOTE:
If you are configuring the Dell EMC Event and Dell EMC Topology Scheduler tasks for the first time, ensure
that you run the scheduler task manually.
5. Click OK.
6. Right-click on each of the tasks and click Run.
NOTE: Ensure that both Dell EMC Event Scheduler and Dell EMC Topology Scheduler are running.
8 Post installation