Users Guide

7. (Optional) Click Edit icon available for each interface to edit the server profile information.

Edit the NIC bonding configuration and Static Onboarding. If the static onboarding is No, select an Untagged Network

and one or more Tagged Networks and click Update.

NOTE: You cannot select same network for both untagged and tagged networks.

(Optional) If the static onboarding is Yes, select Leaf Node and Interface (where the server interface is connected), select

the Routing Protocol.

● (Optional) Select the Routing Protocol as None, and click Update.

● (Optional) Select the Routing Protocol as eBGP, enter the ASN and IP address, and click Update.

● (Optional) Select the Routing Protocol as Static Route, enter the Network Address and Next-Hop Address, and

click Update.

OMNI SmartFabric Management