Users Guide

2. Click Ok to confirm.
3. The system displays Maintenance mode change success message.
Disable Maintenance mode
To disable Maintenance Mode for a service instance:
1. From the Home page, under Service Instance, click Under Maintenance for a specific Service Instance from the list.
Click Ok to confirm.
NOTE:
Once the status changes to In Service, go to the OMNI Appliance Management UI to start the relevant
automation services.
2. Click to confirm.
3. The system displays Maintenance mode change success message.
View vCenter host automation status
OMNI appliance Home page displays the vCenter host automation status. vCenter Host Automation Status displays the list
of all automation services available for the service instance and the status of the automation services for the vCenter host.
OMNI VM represents the status of automation service for the vCenter host using color.
● Blue—Automation service is running.
● Yellow—Automation service is not started.
Also check the status of vCenter host services by placing the cursor on the list.
56
Access to OMNI Fabric Management Portal