Users Guide

NOTE: Edit a connection menu displays edit option of Bridge interface docker0. Do not modify any configuration of
the docker0 interface as it can lead to OMNI appliance failure or unexpected OMNI behavior.
3. Select Wired connection 1, then click Edit.
4. Verify Ethernet (ens160) is connected to the vCenter reachable network, then change the Profile name to vCenter Server
Network.
5. Change the IPv4 configuration from Automatic to Manual from the drop-down. You can choose Automatic or Manual IP
address configuration.
NOTE:
If you are using a stand-alone generic ESXi host deployment and if DHCP services are running on the
Management network subnet, use the default IPv4 vCenter server network configuration which uses automatic IP
address assignment using DHCP.
OpenManage Network Integration 21