Users Guide

Unable to register service instance in OMNI
Unable to register the service instances in OMNI, when:
1. SmartFabric is not reachable. To check the SFS connectivity:
a. Log in as root user through the OMNI appliance console.
b. Check the connectivity of the service instance using the ping command. Use IPv4, hostname, or IPv6 address of the
service instance.
:~$ ping 100.104.22.22
:~$ping6 <fully qualified domain name>
c. If ping fails, check if the OMNI interfaces are configured properly. If OMNI is internal, ensure that the VxRail
Management network is configured.
d. If OMNI is external, ensure that OMNI appliance is configured with the correct port-group that provides connectivity to
SFS.
2. If SFS is reachable, but not able to register service instance.
a. If the master node of the SFS has changed, the IP address of the SFS can also change.
NOTE: This scenario is not applicable if the OMNI appliance is inbound.
b. Identify the master node using the OS10 CLI command. For more information about the command, see Add service
instance.
c. Register with the identified IP address.
OMNI appliance is not synchronized
If the NTP server is not configured, the OMNI appliance VM does not synchronize with the data center.
Check the NTP server status in the OMNI appliance.
1. From the OMNI management menu, select 2. Interface Configuration Menu.
2. Select 4. Show NTP Status.
Troubleshooting
149