Users Guide

Upgrade SmartFabric OS in switch
You can upgrade SmartFabric OS from OMNI VM.
You can upload an OS10 image to upgrade the fabric. For more information about changing the SmartFabric password, see
Configure fabric management actions.
You can upgrade OS using the following steps:
● Upload the latest image in the OMNI VM.
● Upgrade fabric using the uploaded image.
● (Optional) Delete the image from the OMNI VM.
NOTE: Dell Technologies recommends stopping the fabric automation service that is running before starting fabric upgrade.
The system displays the notification before you start SmartFabric OS10 upgrade.
Upload image
Upload an OS10 image to the OMNI VM:
1. Select Service Instance > Fabric Actions > Upgrade OS.
2. Click Upload to upload the .bin file.
Lifecycle management
135