Users Guide
Table Of Contents
- OpenManage Network Integration for SmartFabric Services User Guide Release 2.1
- Contents
- About this guide
- Change history
- Overview of OMNI, SFS, VxRail, and PowerEdge MX
- OpenManage Network Integration
- OMNI vCenter integration
- Access the OMNI stand-alone portal
- Access the OMNI Fabric Management Portal
- OMNI Appliance Management user interface
- SmartFabric management with OMNI
- OMNI feature support matrix
- View SmartFabric instance overview
- View fabric topology
- Manage switches in a fabric
- SmartFabric bulk configuration
- Configure server interface profile
- Configure and manage uplinks
- Configure networks and routing configuration
- Configure global settings for SmartFabric
- View fabric events and compliance status
- OMNI automation support for PowerEdge MX SmartFabric
- OMNI automation support for NSX-T
- Lifecycle management
- Troubleshooting
- Troubleshooting tools
- Unable to add SmartFabric instance in OMNI
- Missing networks on server interfaces
- Unable to launch OMNI UI
- OMNI plug-in does not show service instance
- Unable to register the vCenter in OMNI
- OMNI is unable to communicate with other devices
- Timestamp not synchronized in OMNI
- Reset OMNI VM password
Table 11. General Purpose Networks tab
Field Description
NetworkId Enter the network ID for a general purpose network. This ID
must be unique. For example, external-mgmt.
NetworkName Enter the name of the network. Example, external-mgmt.
Description Enter the description of the general purpose network. This is
an optional field.
VLAN Enter the VLAN ID for the general purpose network. The
VLAN number can range from 1—3999 (excluding 3939).
IPAddressList Enter the list of IP addresses separated by comma.
PrefixLen Enter the prefix length for the IP address.
GateWayIpAddress Enter the gateway IP address.
HelperAddress Enter the helper IP address.
L3 Routed tab—Displays the template to configure L3 Routed interfaces in bulk. The tab also has sample configuration details.
Table 12. L3 Routed tab
Field Description
NetworkId Enter the network ID for a L3 Routed interface. This ID must
be unique. For example, network-2711.
NetworkName Enter the name of the L3 Routed interface.
Description Enter the description of the L3 Routed interface. This is an
optional field.
IPAddressList Enter the IP addresses for the L3 Routed interface separated
by comma.
PrefixLen Enter the prefix length for the IP address.
Multi rack L3 VLAN tab—Displays the template to configure multi rack L3 VLANs in bulk. The tab also has sample
configuration details.
Table 13. Multi rack L3 VLAN tab
Field Description
NetworkId Enter the network ID for a multi rack L3 VLAN. This ID must
be unique. for example, hostoverlay-2500
NetworkName Enter the name of the multi rack L3 VLAN.
Description Enter the description of the multi rack L3 VLAN. This is an
optional field.
VLAN Enter the VLAN ID for the multi rack L3 VLAN. The VLAN
number can range from 1—3999 (excluding 3939).
RackID Enter the rack ID.
RackName Enter the name of the rack.
IPAddressList Enter the IP addresses for the network separated by comma.
PrefixLen Enter the prefix length for the IP address.
GateWayIpAddress Enter the gateway IP address.
HelperAddress Enter the helper IP address.
VLAN Networks tab—Displays the template to configure L2 and L3 VLAN networks in bulk. The tab also has sample
configuration details.
76
SmartFabric management with OMNI