Users Guide

5. Select the Breakout Mode for the port from the list.
6. Click Submit.
The system displays breakout port configured successful or failure message.
To view the details of the breakout ports, select a port to view the properties of the port.
Add a jump port
You can configure one port per leaf switch as a jump port. You can select any available port that is not part of an uplink and ICL,
and port connected to a server in SmartFabric deployment. To configure a jump port:
1. From Leaf Switches, select the leaf switch from the list.
2. Select the Breakout Ports & Jump Port category.
3. Select the switch to view the properties and click Jump Port.
4. Enter the Name of the new jump port, select the Interface Name, Untagged Network.
5. Click Add.
SmartFabric management with OMNI
73