Users Guide

Configure auto negotiation status
You can enable or disable the auto negotiation on a single port or multiple ports.
Auto negotiation option is not applicable for port channel interfaces. When you configure auto negotiation for a port channel
interface, OMNI UI displays a warning message to clear the port interfaces from the selected list.
To enable auto negotiation:
1. From All Ports, select a port or multiple ports and click Enable Auto Neg.
2. Click Yes to confirm.
The system displays the stage-wise progress of the interface status.
To disable auto negotiation:
1. From All Ports, select a port or multiple ports and click Disable Auto Neg.
2. Click Yes to confirm.
The system displays the stage-wise progress of the interface status.
Set MTU value
Set maximum transmitting unit (MTU) for the port:
1. Select a port or multiple ports and click Set MTU.
2. Enter the MTU value and click Set.
3. Click Yes to confirm.
The system displays the action success or failure message.
Manage unused switch ports
You can view and manage the unused ports in the switches. To enable or disable unused ports:
1. Select the SmartFabric instance > Switches.
2. Select any spine or leaf switch by clicking the arrow to view the list of ports.
3. Select Unused Ports category to view the list of unused ports available in the switch.
4. Select a port or multiple ports and click Enable Admin Status.
SmartFabric management with OMNI
71