Users Guide

2. Click Delete to confirm.
The system displays network deletion success message.
Configure multirack L3 VLAN
Starting from 2.0 release, OMNI allows you to configure L3 VLAN network for the racks to which the servers are connected.
Using this feature, you can create a L3 VLAN network for each VLT pair (rack) with a different subnet. This network is used
for NSX-T overlay to create VTEP networks. Create, edit, and delete multirack L3 VLAN networks from OMNI. With 2.1 release,
there is a provision to specify IP address for each switch in a rack when creating a multirack L3 VLAN.
This feature is used as part of NSX-T workflow. As part of automation, OMNI creates all the NSX-T networks as multirack L3
VLAN networks. You can edit and provide the Layer 3 details to the NSX-T networks. For more information, see OMNI support
for NSX-T.
Create multirack L3 VLAN
1. Click SmartFabric instance > Networks > Multi-Rack L3 Networks.
2. Click Create.
3. Enter the network ID, name, VLAN number, IP addresses, description, rack IP addresses, prefix length, gateway IP address,
and helper addresses for each rack available in the SmartFabric cluster.
4. Select the Specific IP Addresses checkbox to specify the IP address for each switch.
5. Click Create.
The system displays VLAN network creation success message.
Edit multirack L3 VLAN configuration
1. Select a network ID from the list and click Edit.
2. Modify the details, edit the configuration as necessary and click Edit.
The system displays edit network success message.
Delete multirack L3 VLAN configuration
1. Select the VLAN network to remove and click Delete.
SmartFabric management with OMNI
109