Users Guide
Table Of Contents
- OpenManage Network Integration for SmartFabric Services User Guide Release 2.0
- Change history
- Overview of OMNI, SFS, VxRail, and PowerEdge MX
- SmartFabric Services
- OpenManage Network Integration
- OMNI vCenter integration
- Access the OMNI stand-alone portal
- Access the OMNI Fabric Management Portal
- OMNI Appliance Management user interface
- OMNI automation support for PowerEdge MX SmartFabric
- OMNI automation support for NSX-T
- OMNI support for SmartFabric instances
- Lifecycle management
- Troubleshooting
- Logs and support data for troubleshooting
- Verify OMNI VM connectivity
- Unable to add SmartFabric instance in OMNI
- Missing networks on server interfaces
- Unable to launch OMNI UI
- OMNI plug-in does not show service instance
- Unable to register the vCenter in OMNI
- OMNI is unable to communicate with other devices
- Timestamp not synchronized in OMNI
- Reset OMNI VM password
2. Select the Network Type as Layer 2 VLAN Network is selected as the Network Type, enter the Network ID, Network
Name, enter a number for the VLAN, enter an optional description, then click Create.
3. The system displays VLAN network creation success message.
VLAN networks for L3 profile:
1. Select Networks > VLAN Networks, and click Create.
2. Select the Network Type as Layer 3 VLAN Network is selected as the Network Type, enter the Network
ID, Network Name, enter a number for the VLAN, enter an optional description, then click Create.
3. The system displays VLAN network creation success message.
148
OMNI support for SmartFabric instances