Users Guide
Table Of Contents
- OpenManage Network Integration for SmartFabric Services User Guide Release 2.0
- Change history
- Overview of OMNI, SFS, VxRail, and PowerEdge MX
- SmartFabric Services
- OpenManage Network Integration
- OMNI vCenter integration
- Access the OMNI stand-alone portal
- Access the OMNI Fabric Management Portal
- OMNI Appliance Management user interface
- OMNI automation support for PowerEdge MX SmartFabric
- OMNI automation support for NSX-T
- OMNI support for SmartFabric instances
- Lifecycle management
- Troubleshooting
- Logs and support data for troubleshooting
- Verify OMNI VM connectivity
- Unable to add SmartFabric instance in OMNI
- Missing networks on server interfaces
- Unable to launch OMNI UI
- OMNI plug-in does not show service instance
- Unable to register the vCenter in OMNI
- OMNI is unable to communicate with other devices
- Timestamp not synchronized in OMNI
- Reset OMNI VM password
4. Select the untagged network, the OMNI network, and Select Yes or No to integrate
the networks that are created automatically in the fabric through vCenter on this uplink.
5. (Optional) Click Create Network to associate a network with the uplink.
Enter the name of the network, optional description, and the VLAN number.
6. Click Finish to complete the L2 uplink creation.
7. The system displays user uplink creation success message.
Create L3 Uplink
Create an L3 uplink of L3 VLAN or L3 routed interface types.
Create L3 VLAN uplink
128
OMNI support for SmartFabric instances