Deployment Guide

3. Enter the Validate NTP Server IP address/host name.

UI is not populated

NOTE: If any IP or SSL certificate changes on the SmartFabric VM, click Update Extension on the SmartFabric vCenter

dashboard.

Check the service status on the plug-in VM.

1. Select 4. Restart SmartFabric Management Service.

2. Select 2. Status SmartFabric Management Service to list the registered vCenter and SmartFabric the VM is managing. Confirm

that all services are active.

Create support bundle

1. Select 4. SmartFabric Management Service Menu.

2. Select 5. Create Support Bundle to create a support bundle at /tmp/support-bundle.tar.gz on the SmartFabric VM.

3. From an external host, scp using admin to transfer the support bundle file out. SCP credentials for the SmartFabric appliance are the

same as the

SmartFabric appliance console password. By default, the username and password is admin/admin.

NOTE:

Recommendation is to set the log level change to DEBUG before creating the support bundle.

Change log level

1. Select 4. SmartFabric Management Service menu.

2. Select 6. Change Application Log Level to display the current log level and switch accordingly.

Troubleshooting