Deployment Guide

Troubleshooting

This information troubleshoots the SmartFabric vCenter appliance connectivity, SmartFabric errors, and UI population errors.

SmartFabric appliance connectivity

Check the IP and DNS settings and connection status.

1. Select 2. Interface Configuration Menu.

2. Select 1. Show Interfaces (q to close view).

3. Select 2. Show Connection Status.

4. Issue a curl https request from the SmartFabric vCenter appliance console to the plug-in appliance IP configured on ens160.

SmartFabric error

Check ens192 has IPv6 link-local address that is enabled and is up.

NOTE:

Multiple fabric or vCenter registrations are shown in Status SmartFabric Management Service.

1. Select 2. Status SmartFabric Managment Service.

64 Troubleshooting