Deployment Guide

1. Select the switch that is configured with a jump port, then click Delete to delete the jump port.
2. Follow the steps in Add new jump port.
Password change
This information describes how to change the password for the SmartFabric domain.
NOTE: If you change the password, the SmartFabric password must be updated on theVxRail Manager as well.
1. Select SmartFabric vCenter, then select SmartFabric.
2. Select the specific SmartFabric instance, select Configure, then select Password Change.
3. Enter the current password for the SmartFabric domain.
4. Enter the new password for the SmartFabric domain, then confirm the new password again.
5. Click Submit. An alert displays at the top after the operation completes.
Upgrade image
This information describes how to upgrade the OS10 image of the fabric. Fabric upgrade displays a list of user-uploaded images to
SmartFabric vCenter.
Upload image
1. Select SmartFabric vCenter, then select SmartFabric.
2. Select the specific SmartFabric instance, select Configure, then select Upgrade.
3. Click Upload, click Choose File, navigate to the image file, and select the file, then click Upload.
52
System management