Deployment Guide

4. Click Finish.

Delete user uplink

NOTE:

You can only delete user-created uplinks. Default system uplinks cannot be deleted.

1. Select the uplink to delete, then click Delete.

2. Click Delete.

Port breakout

This information describes how to display and configure breakout-capable ports. You can choose any breakout mode available on the

configuration to move back and forth.

1. Select SmartFabric vCenter, then select SmartFabric.

2. Select the specific SmartFabric instance, select Configure, then select Port Breakout.

NOTE:

Only breakout-capable ports are listed in the Port Breakout table. The S4148F/T/U/FE-ON switch port

breakout is based on the switch-port-profile configuration (see Configure extended options).

3. Select the port to display breakout port details.

System management