Deployment Guide

NOTE: If you delete an uplink, any unused networks and ports will be available for future use.
1. Select SmartFabric vCenter, then select SmartFabric.
2. Select the specific SmartFabric instance, select Configure, then select User Uplinks.
Create user uplinks
You can create an uplink by selecting the fabric with a unique user-given name, then select the interfaces and networks through the
wizard interface to create a user uplink.
1. Select the Uplink Name, select the fabric, then click Next.
2. Click Select Interfaces, select the interfaces to add to the fabric uplink from the top list, then click Add.
System management
47