Deployment Guide

3. Enter the vCenter Server username and vCenter Server password. Repeat this step to register each vCenter instance (up to 10).
4. Enter the REST user password used during the VxRail cluster configuration through VxRail Manager.
NOTE:
The REST user password is only requested once. Use caution to avoid entering an incorrect password.
The registration response displays before going to the full SmartFabric menu. SSH is enabled on the IP configured on ens160 (vCenter
Server Network), and root SSH is not enabled.
5. The SmartFabric OMNI plug-in registration with vCenter status displays. Press Enter to continue.
6. Logout of all vCenter sessions that you have registered, then log back into the registered vCenter.
NOTE:
You cannot register the same vCenter instance from another SmartFabric VM.
38 OpenManage Network Integration