Deployment Guide

reconfigured for manual deployment.

Are you sure you want to continue with the changes by rebooting the OS10 node?.(y/n)

3. Enter Y to disable SmartFabric Services for VxRail configuration and reboot the switch automatically.

Supported topologies

This information captures only certified, tested, and supported topologies as it pertains to Dell EMC SmartFabric and VxRail HCI

deployments.

Topology 1

• No redundancy at the customer device

• VLT on the Dell EMC switches

• Single uplinks from each Dell EMC ToR. These uplinks can be configured as single static port channels with LACP if wanted. Both ends

of the uplink must match port channel configurations.

• VxRail node connections use the rNDC connections only.

• No stretched VxRail cluster

Topology 2

Enable SmartFabric for VxRail